SmallHD has released the PageOS 6.1.0 Firmware Update. While this isn’t a huge update, it does rectify a lot of bug issues that users were experiencing.
What is new in firmware version 6.1.0?
Improvements and Alterations:
- Simplified the customization process of User Function Dials on Quantum 32 monitors
- Renamed “Backlight” to “Luminance” to more accurately apply to all panel technologies
- Improved the “Lift” manual adjustments for post-calibration color control
- Added an explanation to the user after the monitor fails to load a custom No Signal icon
- Improved image clarity with color gradients
- Faster startup speed for on-camera monitors
Bugs Fixed:
- Settled an issue causing a white flash on startup of some monitors
- Squashed a bug found in the monitor’s Calibration > Manual Adjustment setting
- Fixed a problem displaying the 0 point of Histogram when displaying full range data
- Resolved a case where an OLED 22 would not properly power down when the input voltage dropped below the allowable minimum limit
- Fixed an occasional navigation issues when using Quantum 32 capacitive touch dials
- Resolved an issue causing a “haloing effect” on some Vision 17 monitors
- Resolved an issue of minor backlight flickering on some Vision 24 monitors
The following SmallHD monitors are currently supported in the latest PageOS firmware version 6.1.0:
UltraBright Series
- 503 UltraBright
- 703 UltraBright
- 703 Bolt
- 703 UltraBright SK RX
Focus Series
- FOCUS PRO
- FOCUS PRO OLED
Smart 7 Series
- INDIE 7
- 702 Touch
- CINE 7
- CINE 7 TERADEK 500 TX
- CINE 7 TERADEK 500 RX
- CINE 7 TERADEK SK RX
- ULTRA 7
- ULTRA 7 TX
- ULTRA 7 RX
Smart 5 Series
- INDIE 5
- CINE 5
- ULTRA 5
- ULTRA 5 TX
- ULTRA 5 RX
HD Production Monitors
- 1303 HDR
- 1303 HDR BOLT SIDEKICK
- 1703 P3
- 1703 P3X
- 1703 P3X BOLT SIDEKICK
- 2403 STUDIO
4K Production Monitors
- CINE 13
- CINE 18
- CINE 24
- OLED 22
- OLED 27
- QUANTUM 32
- VISION 17
- VISION 24
This firmware will NOT support the following monitors:
- Focus 5 & 7 (LCD, OLED, HDMI, SDI, & RX/TX)
- 2403 HDR & 2403 HB
- 1703 HDR & 1703 Studio
- 1303 Studio
- 700 Series – 701, 701L, 702 Bright, 702 OLED
- 500 Series – 501, 502, 502 Bright
- This firmware is NOT compatible with the DSMC3 RED Touch, or Action 5
- RED Touch users have firmware available on the RED Touch tab
- This firmware is NOT compatible with legacy monitors (DP1, DP6, DP4, AC7, and DP7-PRO)
- If your firmware is below 3.6.5, we recommend the following upgrade path: 3.6.5 -> 4.8.7 -> 5.5.6 -> 6.0.0
