Italian manufacturer Metamorphosis has released the EXOCAGE system, a full-body, 3D-printed camera cage platform with integrated power and signal distribution. The newest model is the EXOCAGE for Sony FX3 / FX30 V2. Versions are also available for the Panasonic Lumix S5II and S1II series, along with a lower-cost EXOCAGE mini and a standalone power module called EXOCORE.
Pricing starts at €199 for the EXOCAGE mini and runs to €499 for fully equipped versions with a Blackmagic Design HDMI to SDI converter.
Featured Specifications
- Construction: 3D-printed, fiber-reinforced material, made in Italy
- Power: ZGCINE VM-VP1 V-Mount battery plate and ZGCINE MD-P4 D-Tap splitter integrated into the rear EXOCORE module
- Video out: Optional Blackmagic Design Micro Converter HDMI to SDI 3G built into the cage
- Mounting: 2x NATO rails, 2x cheese plates, 15mm rod clamp, XLR handle adapter
- Price: €199 to €499 (VAT included)
What It Is
The EXOCAGE is built around what Metamorphosis calls the EXOSYSTEM. Each cage is made of three parts: a camera-specific FRONT MODULE, a camera-specific MID MODULE, and the EXOCORE, which mounts on the rear of the cage and houses the electronics.
The idea is that the EXOCORE carries over between cameras. If you move to another supported body, you buy new front and mid modules and keep the power and signal hub. Most cages are tied to a single camera and get replaced when the camera does. This approach only replaces the parts that touch the camera.
The cage surrounds the body rather than just framing it, and includes an analog record button wired to the camera. The Panasonic versions also add Custom 1 and Custom 2 analog buttons.
EXOCORE
EXOCORE is the power and connectivity module. It integrates a ZGCINE VM-VP1 V-Mount plate, a ZGCINE MD-P4 D-Tap splitter, and an optional Blackmagic Design Micro Converter HDMI to SDI 3G, powered over USB-C. Two BNC female-to-female adapters bring the SDI signal out through the module.
EXOCORE is also sold on its own. Through a 15mm rod clamp, it can mount to any rig with 15mm rod support, regardless of camera. Buyers can later convert it into a full EXOCAGE with an EXOCORE to EXOCAGE Upgrade Kit.
Front Module Variants
The full-size EXOCAGE and the EXOCAGE mini are offered with two front module options:
- Standard: Fits most PL-to-E or PL-to-L mount adapters. On the Sony version, it also fits the Tilta Autofocus Adapter.
- Mofage Poco Compatible: Clears bulkier PL adapters with autofocus and built-in ND filters, such as the Mofage Poco I and II. Available now for Panasonic. Listed as coming soon for Sony.
Models and Pricing
All prices are in euros and include Italian VAT. Import duties and taxes outside the EU are not included.
| Model | Compatible Cameras | HDMI to SDI Converter | Price |
|---|---|---|---|
| EXOCAGE for Sony FX3 / FX30 V2 | Sony FX3, FX30 | Not included | €449 |
| EXOCAGE for Sony FX3 / FX30 V2 | Sony FX3, FX30 | Included | €499 |
| EXOCAGE CONNECT for Panasonic | Lumix S5II, S5IIX, S1II, S1IIE, S1RII | Not included | €449 |
| EXOCAGE COMPLETE for Panasonic | Lumix S5II, S5IIX, S1II, S1IIE, S1RII | Included | €499 |
| EXOCAGE mini for Panasonic | Lumix S5II, S5IIX, S1II, S1IIE, S1RII | No EXOCORE | €199 |
| EXOCAGE mini for Sony | TBA | No EXOCORE | Coming soon |
| EXOCORE (standalone) | Any rig with 15mm rods | Not included | €349 |
| EXOCORE (standalone) | Any rig with 15mm rods | Included | €399 |
EXOCAGE mini
The EXOCAGE mini uses the same front module as the flagship cages but drops the EXOCORE electronics. It ships with a choice of V-Mount or Sony NP-F battery adapter, the analog record and custom buttons, two cheese plates, and two NATO rails. At €199, it is the entry point to the system. An EXOCAGE mini to EXOCAGE Upgrade Kit converts it to the full version. Metamorphosis has not published pricing for either upgrade kit.
Specifications
| Manufacturer | Metamorphosis (Italy) |
| Construction | 3D-printed, high-performance fiber-reinforced material |
| Architecture | FRONT MODULE + MID MODULE + EXOCORE (rear) |
| Sony compatibility | FX3, FX30 |
| Panasonic compatibility | Lumix S5II, S5IIX, S1II, S1IIE, S1RII |
| Battery plate | ZGCINE VM-VP1 V-Mount (EXOCAGE, EXOCORE); V-Mount or NP-F adapter (mini) |
| Power distribution | ZGCINE MD-P4 D-Tap splitter |
| SDI conversion | Blackmagic Design Micro Converter HDMI to SDI 3G (optional), USB-C powered |
| SDI pass-through | 2x BNC female-to-female adapters |
| Camera controls | Analog record button; Custom 1 and Custom 2 analog buttons (Panasonic) |
| Accessory mounting | 2x NATO rails, 2x cheese plates, 15mm rod clamp, XLR handle adapter (Sony), accessory mounting points |
| Front module options | Standard; Mofage Poco Compatible |
| Cables included | HDMI, USB-C to USB-C, USB-C to USB-A |
| Panasonic extras | EXOCLAMP for S5II series, EXOCLAMP for S1II series, cosmetic cover for unused C2 button (S5II) |
| Other included items | EXOCORE spacer, 2x hex keys |
| Case | Custom hard case (Sony FX3 / FX30) |
| Weight | Not published |
| Dimensions | Not published |
| Price | €199 to €499 (VAT included) |
Who Makes It
Metamorphosis was founded by brothers Meho Gogic, a mechanical engineer with a background in 3D printing and product development, and Ademir Gogic, a filmmaker with commercial production experience.
Availability
The EXOCAGE system is available now direct from metamorphosis3d.com. Metamorphosis says the Sony FX3 / FX30 V2 ships within 2 to 3 business days. Shipping costs are calculated at checkout.
