The Camera Foundry CineBack Rig for Canon C50 is a camera rig that bolts onto the back of your camera to provide you with lots of additional mounting options, V-mount or Gold Mont power, D-tap and USB-C PD outputs, cable management, as well as other features.
CineBack Canon C50 Key features
- V-Mount or Gold Mount battery plate for longer run time
- Works with and without the XLR Top Handle
- Dual USB-C Power Delivery power jacks for powering your camera and other devices
- Additional USB Type A output
- Rotating D-Tap splitter with 4 outputs to power your camera and other accessories
- Quick release compatible when you use the Falcam F38
- Cable management door and storage compartment and with cable routing built in
- Power switch to completely cut power so there is no battery drain
- Screen side mount allowing you to use your camera screen in cine mode, open or closed
- Top and bottom cheese plates for mounting accessories and other rigging gear
- Modular with future accessories possible
Required Gear
To get this version of CineBack working, you will need one of the following cages:
- SmallRig Canon C50 Cage (Model 5656 or 5657).
- Tilta Full Camera Cage for Canon C50 (Model TA-T93-FCC-B)
Specifications
- USB-C Jack (Each)
- Output: Automatically adjusts between 3.3V~12V when connected to USB-C PD (Power Delivery) compatible devices (input voltage should be higher than output voltage). 65W max (5V3A, 9V3A, 12V3A, 20V3.25A, etc.)
- Output over-current protection
- Short-circuit protection
- Over-temperature protection
- D-Tap 4x Splitter
- Output: Whatever voltage you connect to the V-Mount or Gold Mount. Often 14.8v
- 10A Max output current.
- Weight: TBD (no camera, battery or camera cage)
