Jump to content
Sign in to follow this  
DcD

Sachtler SpeedLevel Clamp Compatibility

Recommended Posts

I have a Miller Compass 25 tripod head. Does anyone know if the Sachtler SpeedLevel Clamps work with other tripod heads? Or only on Sachtlers?

Share this post


Link to post
Share on other sites

Depends on the length of the thread at the bottom of the head you are using and if the legs will close when it is used. From memory i don't think it works with a lot of other tripod heads that aren't Sachtler. 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Popular Topics

  • New Posts

    • What are people's general views on gimbals? I have a love/hate relationship with gimbals (I own two relatively lightweight ones) and, in the few years that I've owned them, I simply cannot get to like them. I've tried a cheap Glidecam clone and just hated it, as balancing it was always like trying to get a drunken wife into a car (been there, done that). The gimbals work fine, but they simply can't hold my run & gun rig that weighs 4.3 kg. There are of course gimbals that can hold that weight and newer ones that can do that without having to break down the rig for full movement, but you then end up with a huge weight to carry around (and I'm able to carry some fairly hefty weight). For the sort of work that I was doing before COVID, I was using an Easyrig clone to support a very heavy rig, but I subsequently reduced the weight to a nice 4.3kg and did away with the support (wandering around some places looking like a Ghost Buster started to wear thin). But there are times when I want to move about with the rig and get reasonably stable footage, which kind of points to a gimbal of some sort. Recently I did some testing with a counterweight system, by attaching my monopod to my rig, with the monopod extending horizontally from the rear of the camera (aligned with the lens). The results from the monopod experiment were actually quite surprising, giving an almost gimbal like movement with a bit of stabiliser added in post. Noting that I can't Ninja walk (more like Bobba Fett sitting on my shoulders) the results looked little different to shots using another camera on one of the gimbals. This could be an option with some practice. Gimbals are all the rage at the moment, but are they really an ideal option for documentary style work, which is my main aim? Has anyone come up with a portable solution that doesn't involve a gimbal?  
    • Do check requirements of any festivals you plan to submit to, as well as DCP specs. Many may be fine with whatever format, but some may be fussy. You may find capturing in 16:9 (but framing for 2.35:1) and then editing for 2.35:1 a safer option, so, if necessary, you can re-edit for 16:9 later down the line if required (may involve re-doing some “pan and scan”, but with the vertical alignment). Unless of course you’re shooting anamorphic, then you can’t do this and will need to crop your master heavily to create a 16:9 version. Also consider that, if theatrical release is intended, it’s unlikely to be 16:9, but rather DCI 4K or DCI 2K (1.89). So, if you can shoot in one of those formats instead of UHD/HD, then do! The few pixels of extra width will help you anyway if you’re going for a wider look, and will mean slightly less cropping of the height is needed (you’ll need to work out the correct crop to cut a 2.35:1 portion out of 4096x2160 or 2048x1080). Agree that creative intent is a part of choosing what to do here.  
    • Good luck with your new venture... and ask away away (in the appropriate sub-forum)!
    • I shot plenty of docs and doc style content in 2.35:1, here's a few examples. Ultimately I'd say its down to personal choice and what's best for the project. I picked 2.35:1 in these examples as it was my preference and suited the style of both pieces. Hope that helps...!  
    • I updated my FX9 firmware to version 2.0, and it appears to have broken color peaking. Normal peaking works, but color, b&w, etc. doesn't work. I primarily work on verite stuff, so I rely pretty heavily on color peaking. Anyone else have this issue?
×
×
  • Create New...