Camera Accessories (AKS)
Power Accessories, batteries, cages, rigs, matte boxes, EVF, monitors, recorders & more
46 topics in this forum
-
- 1 reply
- 1200 views
-
- 8 replies
- 4259 views
-
- 13 replies
- 2172 views
-
- 8 replies
- 3339 views
-
- 4 replies
- 1741 views
-
- 9 replies
- 6142 views
-
- 30 replies
- 11649 views
-
- 4 replies
- 2280 views
-
- 0 replies
- 1344 views
-
- 10 replies
- 4360 views
-
- 0 replies
- 1756 views
-
- 0 replies
- 1849 views
-
- 3 replies
- 2357 views
-
- 8 replies
- 2937 views
-
- 12 replies
- 3889 views
-
- 2 replies
- 2066 views
-
- 8 replies
- 3645 views
-
- 7 replies
- 2794 views
-
- 23 replies
- 4581 views
-
- 0 replies
- 2023 views
-
- 6 replies
- 2651 views
-
- 25 replies
- 5966 views
-
- 25 replies
- 5743 views
-
- 0 replies
- 2196 views
-
- 2 replies
- 2608 views
-
-
New Posts
-
According to Panasonic the most common problem is that the camera shuts down by itself. Has anyone had that problem? -
On further reflection what I have in mind isn't going to work anyway over a long period of time without proper sync even an external recording from the Z6 is going to drift relative to a separate audio recording. As far as I can tell there's no way to deal with this without a camera with a genlock input. The Ninja-V with the AtomX sync can record timecode but doesn't retime the input and only uses the genlock also available via the sync accessory for playback. There also doesn't seem to easily be such a thing as a retiming HDMI to SDI converter with REF IN as far as I can find. The audio side of things is easier as even on a relative cheap device like a Sound Devices Mix Pre 10 II it's possible to send word clock in to the BNC input and timecode to the aux input from a device such as a Ultrasync One. I guess the problem is simply too niche as it only crops up in broadcast where everything is expensive or long recordings of things like concerts with separate audio. -
It is a great camera. I actually bought the S1 in preference to the S5 as I wanted the more solid build, plus full sized HDMI and top screen display. One of the autofocus features I use the most is the tap to focus (can't remember exactly what is called). I recently filmed in a factory using a crane, so had my phone running Lumix sync via WiFi, and then was able to set a focus box and tap on my phone screen to set the focus area. It worked flawlessly, plus the ability to also remotely set iso, white balance, shutter speed and aperture was amazing. The fact it takes fantastic photos is a bonus too. I do agree with you about the limited lens options. However their quality is stunning, and if you're going to stick with the system then the investment makes sense. I hope you get the opportunity to do some travel videography 👍 and thanks for taking the time to write up your experiences. -
Funny you mention the monopod - I use one on the base of my S1 with the stabilisation turned on and get very nice results. I have a Ronin S, but to be honest I still prefer the vest system I mistakenly sold after believing all the hype about gimbals. I think you're right in the direction of adding mass to the rig, particularly when it's offset, and if you can couple this with a camera with decent stabilisation the results are excellent and with almost zero setup. I do ninja walk though... I also would be interested if anyone has an alternative solution.
-
Hi, I'm Steve - videographer, editor and CGI dude. New shooter is my go-to site for video related stuff so delighted this forum has been created. Big user of MFT and full frame, but try not to be a fanboy about any particular system. Technology is there to serve us, not the other way round 😃
-